Wooden Wick Care
Understanding and Troubleshooting Wooden Wick Candles: A Guide to Optimal Burning.
Wooden wick candles, known for their soothing crackle and distinctive glow, offer a unique ambience but may require more attention than traditional cotton wick candles. These candles burn differently and occasionally face issues with staying lit. This guide will provide essential tips and best practices for maintaining a wooden wick, ensuring your botanical candle burns cleanly and lasts longer.
Effective Methods for Lighting Wooden Wick Candles
Lighting a wooden wick candle necessitates a different approach compared to cotton wick candles. The optimal method involves tilting the candle itself rather than the lighter or match, allowing the flame to spread evenly across the wick. Wooden wicks might need multiple attempts to ignite due to their nature, which is a typical characteristic of these candles.
Maintaining Your Wooden Wick: Importance of Trimming
The key to an efficient burn is not the wood of the wick, but the wax it draws up. If the wick is overly long or burdened with charred fragments, it hinders the wax's path to the flame, leading to frequent extinguishing of the candle. Regular trimming of the wick, and removing any charred or flaky sections, is crucial for a consistent burn.
The Significance of the Initial Burn
The initial burn of a wooden wick candle is critical. It should be allowed enough time to form a melted wax pool that extends to the candle's edges, potentially taking several hours. This process establishes a 'wax memory,' influencing the candle's future burning pattern. Inadequate initial burning can lead to a 'tunnelling' effect, where a narrow melt pool forms around the wick, preventing oxygen flow and causing the candle to extinguish quickly. To avoid this, ensure the first burn lasts long enough to create a full melt pool, typically at least two hours.
We recommend placing the candle on a heat-resistant surface and using a protective layer underneath, as the candle may overflow.
Preventing and Correcting 'Tunnelling' in Wooden Wick Candles
If tunnelling occurs due to shorter burns, there are ways to correct it:
-
If possible, allow a long burn until the wax melts to the container's edge, resetting the wax's memory. Patience is essential, as the flame height may vary during this process.
-
If the wick is submerged in wax, gently absorb the excess with a paper towel, then relight the candle. Repeat as necessary to provide the wick space to burn effectively.
-
As a last resort, scraping wax from the container's edges or using an aluminium foil dome to assist in melting edge wax can be attempted, but these methods are less guaranteed.